How Long Can You Leave a Robot Pool Cleaner in the Pool?

That experience of keeping your pool clean and sparkling can be quite a challenge, but a robot pool cleaner does half the job for you. However, many pool owners would like answers to the question: How long can you leave a robot pool cleaner in the pool without causing damage or shortening its lifespan? Learn how to use and care for your pool robot to keep it working optimally for as long as possible.

How Long Can You Keep a Robot Pool Cleaner in the Pool?

Most robotic pool cleaners run for only a few hours at a time. In general, you shouldn't keep your pool robotic pool cleaner in the water all the time, as leaving it underwater for too long can cause the motor to wear out, start to corrode and damage the cleaner's internal parts.

How Long Should The Pool Cleaning Process Take?

Standard Cleaning: The average recommendation is for a robot cleaner to run from 2 to 4 hours per clean cycle.

Daily Cleaning: If your pool is heavily used or is near trees and plants, the cleaner should clean it once a day.

Weekly Cleanings—For moderate use, the pool should be kept clean by running the robot cleaner 2 to 3 times a week.

Using a good model such as the Beatbot AquaSense 2 Pro or Beatbot AquaSense 2, it is possible to program smart, using automation to ensure that the cleaning is done without overuse.

The Importance of Not Keeping Your Pool Robot in the Water at All Times

Although it may seem convenient to keep a swimming pool robot cleaner in the water between passes, it can cause several issues:

Chemical Damage

Pool chemicals like chlorine or bromine will break down the rubber, plastic, and metal parts of your cleaner over time. Continuous exposure to such chemicals may likely shorten the lifespan of your pool vacuum robot and cause it to work less effectively.

Cable Tangling and Wear

If you leave the cleaner in the water, the cable is more prone to tangle and damage. When left submerged, the cable can kink or twist, impacting the cleaner’s ability to move around and operate correctly.

3. Algae growth and debris buildup

While your robotic pool cleaner can tackle algae and debris, prolonged time in the pool may allow small debris to jam the filter and decrease suction power. For stubborn algae, you can consider a pool vacuum or, if necessary, an acid wash to resurface your pool.

A Guide to Robot Pool Cleaner: Best Practices

For your robot pool cleaner to offer maximum efficiency, do these best practices:

✅ clean after every cycle

When the cleaning cycle is done, remove the cleaner from the water, rinse it off with clean water, and store it in a shaded and dry place.

✅ Clean the Filter After Every Use

If the filter is clogged, there will be less suction power and, therefore, less cleaning efficiency of the robot. Following each cleaning, clean the filter basket/bag.

✅ Store the Cleaner Properly

Store the cleaner, protecting it from direct sun and extreme/high heat. Don’t tangle the cable; store the cleaner up (if possible).

✅ Use a Pool Skimmer First

To decrease stress on the motor and enhance overall cleaning, skim the most significant bits of debris off the poor cleaner's plate before using it.

How to Deal With Particular Cleaning Problems

If your pool poses unique cleaning challenges, you may need some extra tools or techniques:

How to drain an inground pool without a pump: If your pool needs to be drained, make sure the drainage system is configured properly to avoid damage.

How to acid wash a pool – If there are stubborn stains or algae, then an acid wash will be needed, but this must be done carefully to steer clear of damaging the pool surface.

Will a pool robot pick up algae? Indeed, most top-notch models (e.g., Beatbot iSkim Ultra) are competent at managing even fine algae particles, though maintaining water chemistry is still required.

What is a pool booster pump? – A pool booster pump increases the pressure of the water flow, enhancing the cleaning capacity of pressure-side cleaners. Most robotic cleaners are self-contained, meaning they don’t need a booster pump.

Beatbot: An Advanced Pool Robot for the Next Level

Some of the most futuristic pool cleaning technologies, like Beatbot AquaSense 2 Pro and Beatbot AquaSense 2, also feature smart navigation, high-capacity filters, and advanced suction power. These high-traffic robots are built for intense cleaning tasks and excellent performance with less care.

The Beatbot iSkim Ultra combines surface skimming with deep cleaning, so your pool will be the cleanest possible from top to bottom. This high-performance model will keep your pool cleaner longer with less maintenance.

Conclusion

You might be tempted to leave your robot pool cleaner in the pool for convenience, but removing it after every cleaning cycle helps keep the motor and other components from chemical exposure and potential wear. Regular cleanings, proper storage, and the right complementary tools like a skimmer and pool vacuum will help your pool cleaner run at optimal performance. Whether in your backyard or a condo, pool cleaning has been made easier or more efficient with state-of-the-art models such as Beatbot AquaSense 2 Pro and Beatbot iSkim Ultra.